Technical FAQs

Question

I want to re-arrange the page order of a PDF. I’ve tried the following…

var page = imGearDocument.Pages[indx].Clone();

imGearDocument.Pages.RemoveAt(indx); //// Exception: "One or more pages are in use and could not be deleted."

imGearDocument.Pages.Insert(newIndx, page);

But an exception is thrown. Somehow, even though the page was cloned, the exception states that the page can’t be removed because it’s still in use.

What am I doing wrong here?

Answer

If you’re using an older version of ImageGear .NET, you may run into this exception when you clone the page. Some of the resources between the original and the clone are still shared, which is why this happens.

Starting with ImageGear .NET v24.8, this no longer happens, and the above code should work fine.

If you still need to use the earlier version, you can use the InsertPages method instead.

Question

ImageGear .NET v24.6 added support for viewing PDF documents with XFA content. I’m using v24.8, and upon trying to open an XFA PDF, I get a SEHException for some reason…

SEHException

Why might this be happening?

Answer

One reason could be because you need to execute the following lines after initializing the PDF component, and prior to loading an XFA PDF:

// Allow opening of PDF documents that contain XFA form data.
IImGearFormat pdfFormat = ImGearFileFormats.Filters.Get(ImGearFormats.PDF);
pdfFormat.Parameters.GetByName("XFAAllowed").Value = true;

This will enable XFA PDFs to be opened by the ImageGear .NET toolkit.

Question

In ImageGear, why am I running into AccessViolationExceptions when I run my application in parallel?

Answer

This issue can sometimes occur if ImGearPDF is being initialized earlier in the application. In order to use ImGearPDF in a multi-threaded program, it needs to be initialized on a per-thread basis. For example, if you have something like this:

ImGearPDF.Initialize();
Parallel.For(...)
{ 
    // OCR code
}
ImGearPDF.Terminate();

Change it to this:

Parallel.For(...)
{
    ImGearPDF.Initialize();
    // OCR code
    ImGearPDF.Terminate();
}

The same logic applies to other ImageGear classes, such as ImGearPage instances or the ImGearRecognition class – you should create one instance of each class per thread, rather than creating a single instance and accessing it across threads. In the case of the ImGearRecognition class, you’ll have to use the createUnique parameter to make that possible e.g.:

ImGearRecognition recEngine = ImGearRecognition(true);

instead of

ImGearRecognition recEngine = ImGearRecognition();
Question

How do I remove XMP Data from my image using ImageGear .NET?

Answer

When removing XMP data in ImageGear, the simplest way to do this is to set the XMP Metadata node to null, like so:

ImGearSimplifiedMetadata.Initialize(); 
doc.Metadata.XMP = new ImGearXMPMetadataRoot();

Or, you can traverse through the metadata tree and remove each node from the tree:

// Example code. Not thoroughly tested
private static void RemoveXmp(ImGearMetadataTree tree)
{
ArrayList toRemove = new ArrayList();
foreach (ImGearMetadataNode node in tree.Children)
{
    if (node is ImGearMetadataTree)
        RemoveXmp((ImGearMetadataTree)node);

    if (node.Format != ImGearMetadataFormats.XMP)
        continue;

    toRemove.Add(node);
}

foreach (ImGearMetadataNode node in toRemove)
    tree.Children.Remove(node);
}

TAMPA, Fla. – 2021 marks the 30th anniversary for Accusoft Corporation, the longtime leader in content, processing, conversion, and automation technologies for developers.

Headquartered in Tampa, FL, Accusoft was founded in 1991 as Pegasus Imaging, a provider of technology and solutions to the photo and document imaging markets. In 1998, Pegasus Imaging expanded into medical compression technologies. This technology was adopted by some of the largest medical technology companies in the world, including GE Healthcare, McKesson, Phillips Medical Systems, Siemens Medical Solutions, and Toshiba.

Between 2004-2008 Pegasus Imaging acquired TMSSequoia and Accusoft which moved the company into the forms processing and image cleanup technologies. In 2012, Pegasus Imaging was rebranded to Accusoft Corporation. 

Today, after seeing three decades of change and innovation, Accusoft is proud to bring new technologies to market, driven by the goal of improving the document lifecycle experience for businesses and their employees. 

Most recently Accusoft created and launched OnTask and the Accusoft PDF Viewer. OnTask is a workflow automation tool that makes it easy for small to mid-sized businesses to digitally send and fill forms, get signatures on documents, and automate overall business processes.The Accusoft PDF Viewer is a JavaScript SDK that easily integrates into a developer’s web application to enable PDF viewing and annotation features with no server dependencies.

“Every day I am so amazed by the talent and passion of the team we have built at Accusoft,” said Accusoft CEO Jack Berlin. “30 years in business is a testament to our employees, as well as the innovation and quality of the products we bring to the market.”

For more information about Accusoft, please visit https://www.accusoft.com/.

About Accusoft: 

Founded in 1991, Accusoft is a software development company specializing in content processing, conversion, and automation solutions. From out-of-the-box and configurable applications to APIs built for developers, Accusoft software enables users to solve their most complex workflow challenges and gain insights from content in any format, on any device. Backed by 40 patents, the company’s flagship products, including OnTask, PrizmDoc™ Viewer, and ImageGear, are designed to improve productivity, provide actionable data, and deliver results that matter. The Accusoft team is dedicated to continuous innovation through customer-centric product development, new version release, and a passion for understanding industry trends that drive consumer demand. Visit us at www.accusoft.com.

Question

I am combining multiple PDF documents together, and I need to create a new bookmark collection, placed at the beginning of the new document. Each bookmark should go to a specific page or section of the new document.
Example structure:

  • Section 1
    • Document 1
  • Section 2
    • Document 2

How might I do this using ImageGear .NET?

Answer

You are adding section dividers to the result document. So, for example, if you are to merge two documents, you might have, say, two sections, each with a single document, like so…

  • Section 1
    • Document 1
  • Section 2
    • Document 2

…The first page will be the first header page, and then the pages of Document 1, then another header page, then the pages of Document 2. So, the first header page is at index 0, the first page of Document 1 is at index 1, the second header is at 1 + firstDocumentPageCount, etc.

The following code demonstrates adding some blank pages to igResultDocument, inserting pages from other ImGearPDFDocuments, and modifying the bookmark tree such that it matches the outline above, with "Section X" pointing to the corresponding divider page and "Document X" pointing to the appropriate starting page number…

// Create new document, add pages
ImGearPDFDocument igResultDocument = new ImGearPDFDocument();
igResultDocument.CreateNewPage((int)ImGearPDFPageNumber.BEFORE_FIRST_PAGE, new ImGearPDFFixedRect(0, 0, 300, 300));
igResultDocument.InsertPages((int)ImGearPDFPageNumber.LAST_PAGE, igFirstDocument, 0, (int)ImGearPDFPageRange.ALL_PAGES, ImGearPDFInsertFlags.DEFAULT);
igResultDocument.CreateNewPage(igFirstDocument.Pages.Count, new ImGearPDFFixedRect(0, 0, 300, 300));
igResultDocument.InsertPages((int)ImGearPDFPageNumber.LAST_PAGE, igSecondDocument, 0, (int)ImGearPDFPageRange.ALL_PAGES, ImGearPDFInsertFlags.DEFAULT);

// Add first Section
ImGearPDFBookmark resultBookmarkTree = igResultDocument.GetBookmark();
resultBookmarkTree.AddNewChild("Section 1");
var child = resultBookmarkTree.GetLastChild();
int targetPageNumber = 0;
setNewDestination(igResultDocument, targetPageNumber, child);

// Add first Document
child.AddNewChild("Document 1");
child = child.GetLastChild();
targetPageNumber = 1;
setNewDestination(igResultDocument, targetPageNumber, child);

// Add second Section
resultBookmarkTree.AddNewChild("Section 2");
child = resultBookmarkTree.GetLastChild();
targetPageNumber = 1 + igFirstDocument.Pages.Count;
setNewDestination(igResultDocument, targetPageNumber, child);

// Add second Document
child.AddNewChild("Document 2");
child = child.GetLastChild();
targetPageNumber = 2 + igFirstDocument.Pages.Count;
setNewDestination(igResultDocument, targetPageNumber, child);

// Save
using (FileStream stream = File.OpenWrite(@"C:\path\here\test.pdf"))
{
    igResultDocument.Save(stream, ImGearSavingFormats.PDF, 0, 0, igResultDocument.Pages.Count, ImGearSavingModes.OVERWRITE);
}

...

private ImGearPDFDestination setNewDestination(ImGearPDFDocument igPdfDocument, int targetPageNumber, ImGearPDFBookmark targetNode)
{
    ImGearPDFAction action = targetNode.GetAction();
    if (action == null)
    {
        action = new ImGearPDFAction(
            igPdfDocument,
            new ImGearPDFDestination(
                igPdfDocument,
                igPdfDocument.Pages[targetPageNumber] as ImGearPDFPage,
                new ImGearPDFAtom("XYZ"),
                new ImGearPDFFixedRect(), 0, targetPageNumber));
        targetNode.SetAction(action);
    }
    return action.GetDestination();
}

(The setNewDestination method is a custom method that abstracts the details of adding the new destination.)

Essentially, the GetBookmark() method will allow you to get an instance representing the root of the bookmark tree, with its children being subtrees themselves. Thus, we can add a new child to an empty tree, then get the last child with GetLastChild(). Then, we can set the action for that node to be a new "GoTo" action that will navigate to the specified destination. Upon save to the file system, this should produce a PDF with the below bookmark structure…

Bookmarks example

Note that you may need to use the native Save method (NOT SaveDocument) described in the product documentation here in order to save a PDF file with the bookmark tree included. Also, you can read more about Actions in the PDF Specification.

Question

How do I ensure temp files are deleted when closing ImageGear .NET?

Answer

All PDF objects are based on underlying low-level PDF objects that are not controlled by .NET resource manager and garbage collector. Because of this, each PDF object that is created from scratch should be explicitly disposed of using that object’s Dispose() method.

Also, any ImGearPDEContent object obtained from ImGearPDFPage should be released using the ImGearPDFPage.ReleaseContent() in all cases.

This should cause all temp files to be cleared when the application is closed.

Question

I am trying to deploy my ImageGear Pro ActiveX project and am receiving an error stating

The module igPDF18a.ocx failed to load

when registering the igPDF18a.ocx component. Why is this occurring, and how can I register the component correctly?

Answer

To Register your igPDF18a.ocx component you will need to run the following command:

regsvr32 igPDF18a.ocx

If you receive an error stating that the component failed to load, then that likely means that regsvr32 is not finding the necessary dependencies for the PDF component.

The first thing you will want to check is that you have the Microsoft Visual C++ 10.0 CRT (x86) installed on the machine. You can download this from Microsoft’s site here:

https://www.microsoft.com/en-us/download/details.aspx?id=5555

The next thing you will want to check for is the DL100*.dll files. These files should be included in the deployment package generated by the deployment packaging wizard if you included the PDF component when generating the dependencies. These files must be in the same folder as the igPDF18a.ocx component in order to register it.

With those dependencies, you should be able to register the PDF component with regsvr32 without issue.

Question

How do I ensure temp files are deleted when closing ImageGear .NET?

Answer

All PDF objects are based on underlying low-level PDF objects that are not controlled by .NET resource manager and garbage collector. Because of this, each PDF object that is created from scratch should be explicitly disposed of using that object’s Dispose() method.

Also, any ImGearPDEContent object obtained from ImGearPDFPage should be released using the ImGearPDFPage.ReleaseContent() in all cases.

This should cause all temp files to be cleared when the application is closed.

Question

I am trying to perform OCR on a PDF created from a scanned document. I need to rasterize the PDF page before importing the page into the recognition engine. When rasterizing the PDF page I want to set the bit depth of the generated page to be equal to the bit depth of the embedded image so I may use better compression methods for 1-bit and 8-bit images.

ImGearPDFPage.DIB.BitDepth will always return 24 for the bit depth of a PDF. Is there a way to detect the bit depth based on the PDF’s embedded content?

Answer

To do this:

  1. Use the ImGearPDFPage.GetContent() function to get the elements stored in the PDF page.
  2. Then loop through these elements and check if they are of the type ImGearPDEImage.
  3. Convert the image to an ImGearPage and find it’s bit depth.
  4. Use the highest bit depth detected from the images as the bit depth when rasterizing the page.

The code below demonstrates how to do detect the bit depth of a PDF page for all pages in a PDF document, perform OCR, and save the output while using compression.

private static void Recognize(ImGearRecognition engine, string sourceFile, ImGearPDFDocument doc)
    {
        using (ImGearPDFDocument outDoc = new ImGearPDFDocument())
        {
            // Import pages
            foreach (ImGearPDFPage pdfPage in doc.Pages)
            {
                int highestBitDepth = 0;
                ImGearPDEContent pdeContent = pdfPage.GetContent();
                int contentLength = pdeContent.ElementCount;
                for (int i = 0; i < contentLength; i++)
                {
                    ImGearPDEElement el = pdeContent.GetElement(i);
                    if (el is ImGearPDEImage)
                    {
                        //create an imGearPage from the embedded image and find its bit depth
                        int bitDepth = (el as ImGearPDEImage).ToImGearPage().DIB.BitDepth; 
                        if (bitDepth > highestBitDepth)
                        {
                            highestBitDepth = bitDepth;
                        }
                    }
                }
                if(highestBitDepth == 0)
                {
                    //if no images found in document or the images are embedded deeper in containers we set to a default bitDepth of 24 to be safe
                    highestBitDepth = 24;
                }
                ImGearRasterPage rasterPage = pdfPage.Rasterize(highestBitDepth, 200, 200);
                using (ImGearRecPage recogPage = engine.ImportPage(rasterPage))
                {
                    recogPage.Image.Preprocess();
                    recogPage.Recognize();
                    ImGearRecPDFOutputOptions options = new ImGearRecPDFOutputOptions() { VisibleImage = true, VisibleText = false, OptimizeForPdfa = true, ImageCompression = ImGearCompressions.AUTO, UseUnicodeText = false };
                    recogPage.CreatePDFPage(outDoc, options);
                }
            }
            outDoc.SaveCompressed(sourceFile + ".result.pdf");
        }
    }

For the compression type, I would recommend setting it to AUTO. AUTO will set the compression type depending on the image’s bit depth. The compression types that AUTO uses for each bit depth are: 

  • 1 Bit Per Pixel – ImGearCompressions.CCITT_G4
  • 8 Bits Per Pixel – ImGearCompressions.DEFLATE
  • 24 Bits Per Pixel – ImGearCompressions.JPEG

Disclaimer: This may not work for all PDF documents due to some PDF’s structure. If you’re unfamiliar with how PDF content is structured, we have an explanation in our documentation. The above implementation of this only checks one layer into the PDF, so if there were containers that had images embedded in them, then it will not detect them.

However, this should work for documents created by scanners, as the scanned image should be embedded in the first PDF layer. If you have more complex documents, you could write a recursive function that goes through the layers of the PDF to find the images.

The above code will set the bit depth to 24 if it wasn’t able to detect any images in the first layer, just to be on the safe side.