Technical FAQs

In ImageGear, why am I running into AccessViolationExceptions when I run my application in parallel?

This issue can sometimes occur if ImGearPDF is being initialized earlier in the application. In order to use ImGearPDF in a multi-threaded program, it needs to be initialized on a per-thread basis. For example, if you have something like this:

ImGearPDF.Initialize();
Parallel.For(...)
{ 
    // OCR code
}
ImGearPDF.Terminate();

Change it to this:

Parallel.For(...)
{
    ImGearPDF.Initialize();
    // OCR code
    ImGearPDF.Terminate();
}

The same logic applies to other ImageGear classes, such as ImGearPage instances or the ImGearRecognition class – you should create one instance of each class per thread, rather than creating a single instance and accessing it across threads. In the case of the ImGearRecognition class, you’ll have to use the createUnique parameter to make that possible e.g.:

ImGearRecognition recEngine = ImGearRecognition(true);

instead of

ImGearRecognition recEngine = ImGearRecognition();

How do I remove XMP Data from my image using ImageGear .NET?

When removing XMP data in ImageGear, the simplest way to do this is to set the XMP Metadata node to null, like so:

ImGearSimplifiedMetadata.Initialize(); 
doc.Metadata.XMP = new ImGearXMPMetadataRoot();

Or, you can traverse through the metadata tree and remove each node from the tree:

// Example code. Not thoroughly tested
private static void RemoveXmp(ImGearMetadataTree tree)
{
ArrayList toRemove = new ArrayList();
foreach (ImGearMetadataNode node in tree.Children)
{
    if (node is ImGearMetadataTree)
        RemoveXmp((ImGearMetadataTree)node);

    if (node.Format != ImGearMetadataFormats.XMP)
        continue;

    toRemove.Add(node);
}

foreach (ImGearMetadataNode node in toRemove)
    tree.Children.Remove(node);
}

ImageGear .NET v24.6 added support for viewing PDF documents with XFA content. I’m using v24.8, and upon trying to open an XFA PDF, I get a SEHException for some reason…

Why might this be happening?

One reason could be because you need to execute the following lines after initializing the PDF component, and prior to loading an XFA PDF:

// Allow opening of PDF documents that contain XFA form data.
IImGearFormat pdfFormat = ImGearFileFormats.Filters.Get(ImGearFormats.PDF);
pdfFormat.Parameters.GetByName("XFAAllowed").Value = true;

This will enable XFA PDFs to be opened by the ImageGear .NET toolkit.

How do I ensure temp files are deleted when closing ImageGear .NET?

All PDF objects are based on underlying low-level PDF objects that are not controlled by .NET resource manager and garbage collector. Because of this, each PDF object that is created from scratch should be explicitly disposed of using that object’s Dispose() method.

Also, any ImGearPDEContent object obtained from ImGearPDFPage should be released using the ImGearPDFPage.ReleaseContent() in all cases.

This should cause all temp files to be cleared when the application is closed.

I am trying to deploy my ImageGear Pro ActiveX project and am receiving an error stating

The module igPDF18a.ocx failed to load

when registering the igPDF18a.ocx component. Why is this occurring, and how can I register the component correctly?

To Register your igPDF18a.ocx component you will need to run the following command:

regsvr32 igPDF18a.ocx

If you receive an error stating that the component failed to load, then that likely means that regsvr32 is not finding the necessary dependencies for the PDF component.

The first thing you will want to check is that you have the Microsoft Visual C++ 10.0 CRT (x86) installed on the machine. You can download this from Microsoft’s site here:

https://www.microsoft.com/en-us/download/details.aspx?id=5555

The next thing you will want to check for is the DL100*.dll files. These files should be included in the deployment package generated by the deployment packaging wizard if you included the PDF component when generating the dependencies. These files must be in the same folder as the igPDF18a.ocx component in order to register it.

With those dependencies, you should be able to register the PDF component with regsvr32 without issue.

How do I ensure temp files are deleted when closing ImageGear .NET?

All PDF objects are based on underlying low-level PDF objects that are not controlled by .NET resource manager and garbage collector. Because of this, each PDF object that is created from scratch should be explicitly disposed of using that object’s Dispose() method.

Also, any ImGearPDEContent object obtained from ImGearPDFPage should be released using the ImGearPDFPage.ReleaseContent() in all cases.

This should cause all temp files to be cleared when the application is closed.

I am combining multiple PDF documents together, and I need to create a new bookmark collection, placed at the beginning of the new document. Each bookmark should go to a specific page or section of the new document.
Example structure:

• Section 1
  • Document 1
• Section 2
  • Document 2

How might I do this using ImageGear .NET?

You are adding section dividers to the result document. So, for example, if you are to merge two documents, you might have, say, two sections, each with a single document, like so…

• Section 1
  • Document 1
• Section 2
  • Document 2

…The first page will be the first header page, and then the pages of Document 1, then another header page, then the pages of Document 2. So, the first header page is at index 0, the first page of Document 1 is at index 1, the second header is at 1 + firstDocumentPageCount, etc.

The following code demonstrates adding some blank pages to igResultDocument, inserting pages from other ImGearPDFDocuments, and modifying the bookmark tree such that it matches the outline above, with "Section X" pointing to the corresponding divider page and "Document X" pointing to the appropriate starting page number…

// Create new document, add pages
ImGearPDFDocument igResultDocument = new ImGearPDFDocument();
igResultDocument.CreateNewPage((int)ImGearPDFPageNumber.BEFORE_FIRST_PAGE, new ImGearPDFFixedRect(0, 0, 300, 300));
igResultDocument.InsertPages((int)ImGearPDFPageNumber.LAST_PAGE, igFirstDocument, 0, (int)ImGearPDFPageRange.ALL_PAGES, ImGearPDFInsertFlags.DEFAULT);
igResultDocument.CreateNewPage(igFirstDocument.Pages.Count, new ImGearPDFFixedRect(0, 0, 300, 300));
igResultDocument.InsertPages((int)ImGearPDFPageNumber.LAST_PAGE, igSecondDocument, 0, (int)ImGearPDFPageRange.ALL_PAGES, ImGearPDFInsertFlags.DEFAULT);

// Add first Section
ImGearPDFBookmark resultBookmarkTree = igResultDocument.GetBookmark();
resultBookmarkTree.AddNewChild("Section 1");
var child = resultBookmarkTree.GetLastChild();
int targetPageNumber = 0;
setNewDestination(igResultDocument, targetPageNumber, child);

// Add first Document
child.AddNewChild("Document 1");
child = child.GetLastChild();
targetPageNumber = 1;
setNewDestination(igResultDocument, targetPageNumber, child);

// Add second Section
resultBookmarkTree.AddNewChild("Section 2");
child = resultBookmarkTree.GetLastChild();
targetPageNumber = 1 + igFirstDocument.Pages.Count;
setNewDestination(igResultDocument, targetPageNumber, child);

// Add second Document
child.AddNewChild("Document 2");
child = child.GetLastChild();
targetPageNumber = 2 + igFirstDocument.Pages.Count;
setNewDestination(igResultDocument, targetPageNumber, child);

// Save
using (FileStream stream = File.OpenWrite(@"C:\path\here\test.pdf"))
{
    igResultDocument.Save(stream, ImGearSavingFormats.PDF, 0, 0, igResultDocument.Pages.Count, ImGearSavingModes.OVERWRITE);
}

...

private ImGearPDFDestination setNewDestination(ImGearPDFDocument igPdfDocument, int targetPageNumber, ImGearPDFBookmark targetNode)
{
    ImGearPDFAction action = targetNode.GetAction();
    if (action == null)
    {
        action = new ImGearPDFAction(
            igPdfDocument,
            new ImGearPDFDestination(
                igPdfDocument,
                igPdfDocument.Pages[targetPageNumber] as ImGearPDFPage,
                new ImGearPDFAtom("XYZ"),
                new ImGearPDFFixedRect(), 0, targetPageNumber));
        targetNode.SetAction(action);
    }
    return action.GetDestination();
}

(The setNewDestination method is a custom method that abstracts the details of adding the new destination.)

Essentially, the GetBookmark() method will allow you to get an instance representing the root of the bookmark tree, with its children being subtrees themselves. Thus, we can add a new child to an empty tree, then get the last child with GetLastChild(). Then, we can set the action for that node to be a new "GoTo" action that will navigate to the specified destination. Upon save to the file system, this should produce a PDF with the below bookmark structure…

Note that you may need to use the native Save method (NOT SaveDocument) described in the product documentation here in order to save a PDF file with the bookmark tree included. Also, you can read more about Actions in the PDF Specification.